+1 (954) 589-2343  |  Contact us

Rainman Petrol-75 (Gasoline) Watermaker

$5,587.00

Our entry level system, best suited for those on a budget. It can be upgraded to a high output system at a later date by adding a second membrane.

• 55-75 lph (15-20 gph)
• 1 x 40″ RO Membrane

WHY CHOOSE THE PETROL (GAS) WATERMAKER SYSTEM? Petrol (gasoline) exists on most boats already, so there’s good reason why you may consider using it to power your watermaker. Some of the key benefits of using a separate motor for your watermaker include:

  • Simplicity – For a portable configuration, there are only two boxes to set up and no need for external electricity.
  • Redundancy – If your generator / inverter fails, you can still make water.
  • Efficiency – There are no conversion losses between mechanical and electrical energy. Depending on water temperature, and source water salinity, you would expect a fuel to fresh water production ratio of about 150:1.
  • Security – If you are in an urban survival situation after a natural disaster, a portable generator has very broad utility and greater chance of being stolen, rendering an AC system useless.

PETROL (GAS) WATERMAKER ECONOMY FEATURES:

  • 2.1HP Honda GXH50 (4 stroke) motor
  • 700 ml (1.5pt) fuel / 70 minutes operation
  • Integrated flexible impeller lift pump uses non-proprietary impeller
  • 2 meter (6 ft) maximum lift above sea level
  • General Pump WM 316 stainless steel high pressure triplex plunger pump
  • General Pump 316SS/ceramic relief valve to prevent over-pressurisation
  • Sound levels: 73dB at 6 meters (20 ft)
  • Case of sturdy molded polyethylene
  • RO Case (mountable if desired): Rotomolded polyethylene
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment mounted on PSU
  • 0 – 150lph (40gph) product water flow meter, integrated into RO case
  • 5 meter (16 ft) intake hose fitted with one way valve to remain primed, with detachable strainer
  • 3 meter (10 ft) brine waste discharge hose
  • PSU weight: 26kg (58lb)
  • PSU Dimensions: 600 x 375 x 270mm (23.6 x 14.8 x 10.6″)
  • Related RO weight: 11kg (24lb)
  • Related RO dimensions: 1,180 x 250 x 130mm (46.5 x 9.8 x 5.1″)
WHY CHOOSE THE PETROL (GAS) WATERMAKER SYSTEM? Petrol (gasoline) exists on most boats already, so there’s good reason why you may consider using it to power your watermaker. Some of the key benefits of using a separate motor for your watermaker include:

  • Simplicity – For a portable configuration, there are only two boxes to set up and no need for external electricity.
  • Redundancy – If your generator / inverter fails, you can still make water.
  • Efficiency – There are no conversion losses between mechanical and electrical energy. Depending on water temperature, and source water salinity, you would expect a fuel to fresh water production ratio of about 150:1.
  • Security – If you are in an urban survival situation after a natural disaster, a portable generator has very broad utility and greater chance of being stolen, rendering an AC system useless.

PETROL (GAS) WATERMAKER ECONOMY FEATURES:

  • 2.1HP Honda GXH50 (4 stroke) motor
  • 700 ml (1.5pt) fuel / 70 minutes operation
  • Integrated flexible impeller lift pump uses non-proprietary impeller
  • 2 meter (6 ft) maximum lift above sea level
  • General Pump WM 316 stainless steel high pressure triplex plunger pump
  • General Pump 316SS/ceramic relief valve to prevent over-pressurisation
  • Sound levels: 73dB at 6 meters (20 ft)
  • Case of sturdy molded polyethylene
  • RO Case (mountable if desired): Rotomolded polyethylene
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment mounted on PSU
  • 0 – 150lph (40gph) product water flow meter, integrated into RO case
  • 5 meter (16 ft) intake hose fitted with one way valve to remain primed, with detachable strainer
  • 3 meter (10 ft) brine waste discharge hose
  • PSU weight: 26kg (58lb)
  • PSU Dimensions: 600 x 375 x 270mm (23.6 x 14.8 x 10.6″)
  • Related RO weight: 11kg (24lb)
  • Related RO dimensions: 1,180 x 250 x 130mm (46.5 x 9.8 x 5.1″)
NOTE ON IMPORT DUTIES & SALES TAX:

For the USA – the price billed on checkout will be the Landed Cost (includes freight, import duty and sales tax),

For all other countries – the price billed on checkout will be the item cost + freight rate only; the recipient will be liable to pay import duty and sales tax (if applicable) in their country.

Related products

Related products

Get your watermaker today!

WATERMAKERS ›
ACCESSORIES ›
CONSUMABLES ›