+1 (954) 589-2343  |  Contact us

Rainman AC-70 (Electric) Watermaker

$4,838.00 – $4,922.00

A great option if you are physically space constrained. Also common if this is a backup system on a larger vessel as it can be stowed in smaller spaces.

The system can be purchased either as the traditional blue case version or in the modular configuration. The performance and power consumption are identical between the two options, so your specific requirements control which is best suited for your application.

• 50-70 lph (13-18 gph)
• 2 x 21″ RO Membranes

COMMON FEATURES BETWEEN CASED AND MODULAR OPTIONS:

  • 1.5 HP totally enclosed fan cooled (TEFC) induction motor
  • 1250 watts steady state power consumption
  • Current draw 6 amps (230VAC) or 12 amps (115VAC)
  • Power cord length: 3 meters (10 ft)
  • Plug type choices: US (NEMA 5-15), Australian (AS/NZS 3112), UK (BS 1363), Europe (CEE 7/7)
  • Integrated flexible impeller lift pump uses non-proprietary impeller
  • 2 meter (6 ft) maximum lift above sea level
  • General Pump WMR 316 stainless steel high pressure triplex plunger pump
  • Integrated General Pump 316SS / ceramic relief valve to prevent over-pressurization
  • Sound levels: 62dB at 6 meters (20 ft)

How to install your Rainman Watermaker ›

FEATURES SPECIFIC TO THE CASED VERSION:

  • Case of sturdy injection molded polypropylene
  • PSU storage/mounting seat: fiberglass reinforced nylon with strap
  • RO Case (mountable if desired): rotomolded polyethylene
  • Plumbing installation kit at extra cost
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment mounted on PSU
  • 0 – 150lph (40gph) product water flow meter, integrated into RO case
  • Valve / gauge control assembly integrated into RO case
  • 5 meter (16 ft) intake hose fitted with one way valve to remain primed, with detachable strainer
  • 3 meter (10 ft) brine waste discharge hose
  • PSU weight: 24kg (53lb)
  • PSU Dimensions: 600 x 375 x 270mm (23.6 x 14.8 x 10.6″)
  • Related RO weight: 14kg (31lb)
  • Related RO dimensions: 690 x 220 x 150mm (27.2 x 8.7 x 5.9″)
FEATURES SPECIFIC TO THE MODULAR VERSION:

  • No shell
  • PSU easy mounting kit: fiberglass reinforced nylon for high rigidity and tensile strength
  • RO easy mounting kit: fiberglass reinforced nylon for high rigidity and tensile strength
  • Plumbing installation kit included with purchase
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment with SS316 mounting bracket
  • 0 – 150lph (40gph) product water flow meter, with SS316 mounting bracket
  • Valve / gauge control assembly at end of 5 meter (16 ft) high pressure hose for remote mounting
  • 5 meter (16 ft) intake hose
  • 6 meter (20 ft) brine waste discharge hose
  • PSU weight: 23kg (51lb)
  • PSU Dimensions: 470 x 270 x 240mm (18.5 x 10.7 x 9.5″)
  • Related RO weight: 13kg (29lb)
  • Related RO dimensions (in mounting brackets): 670 x 220 x 120mm (26.4 x 8.7 x 4.7″)
INSTALLED OR PORTABLE WATERMAKER: Our traditional system in the blue case can be used as either portable or installed. If you wish to install it, it becomes a two box installation. Various approaches that can be utilized include:

  • Keep it portable, pulling it out and setting it up each time you wish to use it.
  • Leave the unit in a locker, but pull out the hoses and throw overboard to make water, avoiding the need to move the system around on your deck.
  • Keep the system portable, but use a cam-lock fitting to temporarily plumb the system into a teed deck wash fitting. This gives the benefits of an installed system while using your portable unit while underway.
  • Fully plumb the system in, including the autoflush system.

How to install your Rainman Watermaker ›

COMMON FEATURES BETWEEN CASED AND MODULAR OPTIONS:

  • 1.5 HP totally enclosed fan cooled (TEFC) induction motor
  • 1250 watts steady state power consumption
  • Current draw 6 amps (230VAC) or 12 amps (115VAC)
  • Power cord length: 3 meters (10 ft)
  • Plug type choices: US (NEMA 5-15), Australian (AS/NZS 3112), UK (BS 1363), Europe (CEE 7/7)
  • Integrated flexible impeller lift pump uses non-proprietary impeller
  • 2 meter (6 ft) maximum lift above sea level
  • General Pump WMR 316 stainless steel high pressure triplex plunger pump
  • Integrated General Pump 316SS / ceramic relief valve to prevent over-pressurization
  • Sound levels: 62dB at 6 meters (20 ft)

How to install your Rainman Watermaker ›

FEATURES SPECIFIC TO THE CASED VERSION:

  • Case of sturdy injection molded polypropylene
  • PSU storage/mounting seat: fiberglass reinforced nylon with strap
  • RO Case (mountable if desired): rotomolded polyethylene
  • Plumbing installation kit at extra cost
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment mounted on PSU
  • 0 – 150lph (40gph) product water flow meter, integrated into RO case
  • Valve / gauge control assembly integrated into RO case
  • 5 meter (16 ft) intake hose fitted with one way valve to remain primed, with detachable strainer
  • 3 meter (10 ft) brine waste discharge hose
  • PSU weight: 24kg (53lb)
  • PSU Dimensions: 600 x 375 x 270mm (23.6 x 14.8 x 10.6″)
  • Related RO weight: 14kg (31lb)
  • Related RO dimensions: 690 x 220 x 150mm (27.2 x 8.7 x 5.9″)
FEATURES SPECIFIC TO THE MODULAR VERSION:

  • No shell
  • PSU easy mounting kit: fiberglass reinforced nylon for high rigidity and tensile strength
  • RO easy mounting kit: fiberglass reinforced nylon for high rigidity and tensile strength
  • Plumbing installation kit included with purchase
  • Single 10″ x 2.5″ non-proprietary 5 micron pre filter to remove sediment with SS316 mounting bracket
  • 0 – 150lph (40gph) product water flow meter, with SS316 mounting bracket
  • Valve / gauge control assembly at end of 5 meter (16 ft) high pressure hose for remote mounting
  • 5 meter (16 ft) intake hose
  • 6 meter (20 ft) brine waste discharge hose
  • PSU weight: 23kg (51lb)
  • PSU Dimensions: 470 x 270 x 240mm (18.5 x 10.7 x 9.5″)
  • Related RO weight: 13kg (29lb)
  • Related RO dimensions (in mounting brackets): 670 x 220 x 120mm (26.4 x 8.7 x 4.7″)
INSTALLED OR PORTABLE WATERMAKER: Our traditional system in the blue case can be used as either portable or installed. If you wish to install it, it becomes a two box installation. Various approaches that can be utilized include:

  • Keep it portable, pulling it out and setting it up each time you wish to use it.
  • Leave the unit in a locker, but pull out the hoses and throw overboard to make water, avoiding the need to move the system around on your deck.
  • Keep the system portable, but use a cam-lock fitting to temporarily plumb the system into a teed deck wash fitting. This gives the benefits of an installed system while using your portable unit while underway.
  • Fully plumb the system in, including the autoflush system.

How to install your Rainman Watermaker ›

NOTE ON IMPORT DUTIES & SALES TAX:

For the USA – the price billed on checkout will be the Landed Cost (includes freight, import duty and sales tax),

For all other countries – the price billed on checkout will be the item cost + freight rate only; the recipient will be liable to pay import duty and sales tax (if applicable) in their country.

Related products

Related products

Get your watermaker today!

WATERMAKERS ›
ACCESSORIES ›
CONSUMABLES ›